SE14 Sigle Axis Slewing Drive Solar Tracker PV Panels

SE14 Sigle Axis Slewing Drive Solar Tracker PV Panels

slewing drive worm gear gearbox for solar tracker system with solar tracker controller

SE14 SC14 sigle axis slewing drive solar tracker PV panels

image001(001)


SC14 slewing drive with 24VDC high torque motor

Holding Torque=48Kn.m

Tilting Moment Torque=67.8Kn.m

Rated Ouput Torque=10200N.m

Rated Output Speed=0.018rpm


Product Advantage

slewing drives sit on the center axis rotation of the torque tube drive line, they can be set as close to the ground as the size of the solar panels will permit. This allows the shortest, strongest, and least expensive underlying structure to be built for supporting the solar trackers in the field, which is a considerable amount of the overall cost incurred.

Slewing drives rotate 360˚ continuously, so it’s up to the solar tracking design engineer to limit their rotation at whichever angle is desired for the particular equipment. The selection is endless. For linear actuators though the size, cost, and approvals are unwieldy for anything more than +/-45˚.

Installation of a slewing drive is simply the fastening of the main structural bolts (normally four fasteners). There is no sub-assembly, post qualification, lubrication, inspection, or other work required. 

Slewing drives are shown to last 25-30 years in solar applications, with some models even available in a maintenance free version. 


image004


SE14 and SC14 used on 45-55㎡ CPV solar tracker project.


SE14 slewing drive is a good solutiom for 20-30 PCS solar panels single axis solar tracker design

image003(001)


Coresun Drive SE14 SC14 worm shaft and slewing bearing machining


image005


Hot Tags: se14 sigle axis slewing drive solar tracker pv panels, China, manufacturers, suppliers, customized, dual axis slewing drives, rotation gear for solar panels tracker, heliostat system slewing drive motor, vertical slew drive, SDE slewing motor, gear motor slewing drive

Send Inquiry