In the use of slewing bearings, many customers will react to the slow speed of slewing bearings. So today Xiaobian will share with you what factors affect the rotational speed of slewing support.
1. The limit speed of thrust slewing bearing is very low. If the axial load is not very large, angular contact ball slewing bearing can be used to bear the axial load.
2. Installation and disassembly. When the revolving bearing seat has no split surface and must be installed and disassembled along the axis, the bearing with separated inner and outer rings should be selected first. When the revolving bearing is installed on the long axis, in order to facilitate the assembly and disassembly, the bearing with conical ring hole I - 12 in the inner ring hole can be selected.
3. Requirements of alignment performance When the axis of inner and outer rings of slewing support has relatively large rotation angle, the spherical or roller revolving support should be adopted.
